Plumbing problems come in all shapes and sizes, from the comparatively small and cheap like running toilet or dripping faucet to a sewer system backup or a huge pipe leak. Most people don’t take plumbing problems seriously. After all, the common belief is that how can a plumbing issue damage my whole house? If you think like this, then you may or may not be right. Every problem is preventable, but it can leave some major damage if not handled at the right time. If you have a plumbing issue, it’s better to get professional plumbing services in Dubai to investigate the matter and advise you accordingly.
This article is not meant to convince you to hire plumbing services in Dubai, but we will educate you about some common plumbing issues that need attention. When you know the different types of problems, it becomes easier to minimize and prevent them.
The Most Common Plumbing Issues
Slow draining sink
Usually, this issue is caused by a blockage that can restrict water flow. Most kitchen sinks contain things like food remnants or congealed fat. While in bathrooms, the sink blockage is mostly caused by knotted hair and soap. If this issue appears minor to you, you can use some common methods, including pouring down baking soda, using a plunger, using chemical clog remover, or using a plumber’s snake. Moreover, if you don’t handle this issue on time, it can become worse over time, and eventually, the drain will become blocked entirely.
Using a chemical to unclog the sink
First, if you have decided to resolve the issue on your own, don’t forget to follow all the directions on the packaging and never use too much. Further, Wear safety goggles and gloves. Note never to mix two different chemicals. It is also important to mention that chemicals can damage your drain pipes if you use them repeatedly. So we recommend hiring plumbing services to handle this.
Perhaps the most common problems that occur in plumbing are of dripping faucets. This issue is not just a source of irritation, but it also increases your water bill because of water wastage, in short, costing you more money.
Did you know that a single faucet can drip away hundreds of gallons in a year?
There can be many different causes for this faucet dripping, but mostly it is caused by an internal washer that becomes still, worn, torn, or gets dislodged over time. Resolving this issue is usually easily fixable, but it needs the right tools.
Whenever a toilet bowl fills up and doesn’t drain away, you have a clogged toilet. Generally, this blockage is caused by a mixture of human waste and paper. Now, while in most cases, it can be resolved with a plunger, but if that doesn’t work, you need a sewer snake or a drain auger to loosen up the blockage.
Leaky pipes may seem like a small issue, but they can be a big nuisance. Therefore, never take this issue casually as it can damage the floors and furniture, and the dampness can lead to bugs like cockroaches. These kinds of leaks always happen at the pipe joints. Compounds, tape, and fillers can usually provide a temporary fix. However, you need to replace a piece of pipe or other related fittings to fix the issue.
A running toilet can cost you a lot of money; it can lead to 200 gallons of water wastage every day. Hence, this most common cause is the faulty flapper valve that controls the water passing from the tank to the bowl. The fix is straightforward, but since it’s more technical, you may want to involve someone who is professional. The less common reason could be sediment affecting filling and flushing. If your water bill has increased, then you should check for leaks. It is not that hard. Just put some food coloring in the tank and see if the color makes its way to the bowl without flushing.
Clogged Bath or Shower Drain
Just like bathroom sinks, the shower and bath drains get blocked because of clogged hair and soap. You may need to use a snake or a plunger to clear this blockage. At times baking soda and vinegar can dissolve the clog as well. Generally, this problem can get worst over time if you don’t deal with it correctly. The issue can be minimized or prevented by purchasing a drain guard to catch the hair.
How can you unclog the shower drain with a plunger?
- Add some petroleum jelly to the edge of the plunger’s suction pad to improve the seal.
- Ensure that there is enough water in the shower for the plunger to be submerged.
- Then, plunge vigorously.
Faulty Water Heater
Most people don’t discover this issue until they are taking a shower, and the water suddenly gets cold. Multiple reasons can cause this issue. For instance, the pilot light might go out. A build-up of sediment in the water tank can also lead to such problems. Or there may be a fault in the thermostat. Generally, you should hire plumbing services in Dubai to have an expert inspect the issue. They can better understand, fix and maintain the water heater.
Low water pressure
If waters trickle out of the tap instead of gushing, then this might be a symptom of low water pressure. This issue is usually caused by leaking pipes that are broken, corroded, or worn. Typically, it is caused by a build-up of mineral deposits or mineral on aerators. You can soak the aerator in vinegar to clean it. If it is showerhead, that is the issue, then you have to either soak the showerhead in vinegar, or you will need a replacement.
How can you clean a shower head with vinegar?
- Dismantle the shower head and clean the dirt off thoroughly
- Use a toothbrush dipped in vinegar and scrub to loosen mineral deposits
- Use a toothpick to poke off any loose deposits
- Soak the dismantled parts in vinegar overnight to remove leftover deposits
Keep all these issues in mind next time there is a plumbing problem in your house. If you want to deal with these issues the right way then hire our plumbing services in Dubai.